New And Reviewed: UK Top Fake Panerai Submersible Elux LAB-ID Watches

Panerai releases new mechanical perfect UK replica Panerai Submersible watches with a special luminescence dial called the Elux LAB-ID.

The case, dial and hands

The case is based on the AAA Swiss Panerai Submersible fake watches. However, what is new is the case incorporates not only the usual crown protector, but an additional cover which swings up to reveal a button. This is located at the 8-9 o’clock position. More on this button later.

Also new is the case is made from an alloy which high quality Panerai replica watches calls Ti-Ceramitech. This is a ceramicised titanium with a patent pending by Panerai and is is a result of a 7 year development process. The titanium is ceramicised through a process called Plasma Electrolytic Oxidation. This process transforms the titanium alloy surface into a dense ceramic layer. The technique yields a significantly enhanced hardness, and the resultant case is 44% lighter than steel yet has fracture toughness ten times higher than traditional ceramic. A material that can withstand high pressure, and very high thermal stress. The electrolyte oxidation also produces the case’s peculiar and striking blue colour, a shade inspired by the open seas.

The trick up the ELUX sleeve is certainly the Power Light feature. Illumination via LED lights is available on-demand by pushing a button on the case located at the 8 o’clock position. The button is protected by a cover which pivots out to prevent accidental activation. Through this pusher, the 2024 1:1 copy watches illuminates using a mechanism using four dedicated barrels. These four barrels are wound as the watch is being wound and is part of the six barrel configuration, the other two barrels powers the timekeeping system. A push, which feels like starting a chronograph releases a spring which powers a tiny 8 x 2.3mm micro generator. The feel of the pusher is progressive rather than one with a click on activation. This generator uses custom made coils, magnets and a stator which drives a high speed rotor operating at 80 revolutions a second to generate a high frequency electrical current at 240Hz. The energy is then channeled to illuminate several indicators placed on the dial. These include the power reserve indicator and the indices. It also illuminates the moving elements such as the hands and bezel marker. As the electricity has to be conducted to the bezel which is movable and outside the cheap replica watches case, it uses a magnetic drive system to transmit energy to light up the dot on the bezel.

As usual, the dial layout is very clear and legible, using large dot markers and very large hands with infilling of lume. In addition, the indices and hands are accented with green Super-LumiNova X2. The X2 designation denotes a new grade that ensures 10% higher luminosity after 180 minutes in the dark compared to the more commonly used Super-LumiNova X1. X1 is used to illuminate the blue-accents on the minute hand and dot on the bezel.

The movement

The movement is the P.9010/EL, which is essentially a conventional P.9010 movement with an added “power light” module. The P9010 base movement is standard caliber used in many other Swiss made Panerai replica watches. It offers 3 days of power reserve running on two barrels. To this, the speciality of the additional 4 barrels driving the light generation system is added. A linear power light reserve indicator is also added.

The movement is not visible as the case back of the super clone watches wholesale is sealed. And thus it is not possible for us to judge the movement finishing. Interestingly the case back is also in Ti-Ceramitech and is screw down.

Leave a comment

Your email address will not be published. Required fields are marked *